An Fitting Hose End

Female To 3/8″ Barb Hose Fitting 45 Degree Swivel

Features Size: The thread size of 6AN is 9/16-18UNF. OD of brab: 3/8 inch.Material: Made of aluminum alloy 6061-T6.Seal: The AN side of the flare is sealed by a 37 degree angle.Parameter: Working pressure: 1500PSI; Working temperature: -65°F-252°F.Easy installation: Just push the barb end of the fitting into the hose. It is recommended to use […]

6AN Female To 3/8″ Barb Hose Fitting 90 Degree Swivel

Features Size: The thread size of 6AN is 9/16-18UNF. OD of brab: 3/8 inch.Material: Made of aluminum alloy 6061-T6.Seal: The AN side of the flare is sealed by a 37 degree angle.Parameter: Working pressure: 1500PSI; Working temperature: -65°F-252°F.Easy installation: Just push the barb end of the fitting into the hose. It is recommended to use […]

6AN Male To 3/8″ SAE Quick Disconnect Male Push On EFI Fitting

Features If the product is in stock, we will ship it to you within 3-5 days. If not, please contact us to know the production time. We have options for air freight, and sea freight. It depend on your needs, it usually takes 7-9 days for air freight and 25-30 days for sea freight. Full […]

1/4″ NPT Male To 3/8″ Barb Push On Fitting 45 Degree Aluminum

Features [Size] Thread size of NPT: 1/4-18 NPT; OD of barb: 3/8 inch.[Material] Made of aluminum alloy 6061-T5, anodized black surface.[Application] Widely used in oil cooler, fuel tank, air cooled motor, fuel system etc.[Seal] The NPT side is sealed with tapered threads,please use sealant or PTFE tape to ensure a better seal.[Installation] When installing barb […]

1/8″ NPT Male To 1/4″ Barb Fitting 90 Degree Aluminum

Features [Size] Thread size of NPT: 1/8-27 NPT; OD of barb: 1/4 inch.[Material] Made of aluminum alloy 6061-T2, anodized black surface.[Parameter] Working temperature range:-65°F to 252°F (-53°C to 122°C)[Seal] The NPT side is sealed with tapered threads,please use sealant or PTFE tape to ensure a better seal.[Installation] When installing barb fittings, it is recommended to […]

180 Degree PTFE Hose End Fitting Black For PTFE Hose Only

Features The stainless steel braided PTFE AN hose uses an olive that fits over the end of the PTFE liner with care taken to ensure all of the stainless steel braid remains outside of the olive and not trapped. The securing nut pulls this tight to the hose end and at the same time closes […]